F 450 4WD Super Duty V10-6.8L VIN S (1999)
5. Remove the front stabilizer bar-to-axle retaining bolts.
6. If equipped, disconnect the steering damper at the axle.
7. Disconnect the steering linkage at the steering knuckles, and position it aside, please refer to Sterring and Suspension/Steering/Tie Rod/Tie Rod
End/Service and Repair/ See: Steering and Suspension/Steering/Tie Rod/Tie Rod End/Service and Repair
CAUTION: Index-mark the driveshaft to the companion flange to maintain proper driveline balance. Disconnect the driveshaft at the front