F 450 4WD Super Duty V8-6.4L DSL Turbo (2008)
Piston: Overhaul
Piston
Material
Disassembly and Assembly
1. NOTE: Mark the connecting rod and piston to make sure correct orientation on reassembly.
Remove the 2 piston pin retainers.
2. NOTE: The piston pins are a floating type piston pin and should not require a press to remove or install them.
Remove the connecting rod.
^
Remove the piston pin.
^
Remove the connecting rod.
3. To assemble, reverse the disassembly procedure.
^
Lubricate the connecting rod piston pin bore, piston pin bore and piston pin with clean engine oil prior to assembly.
