F 450 4WD Super Duty V8-6.4L DSL Turbo (2008)
16. NOTE: RH side shown, LH side similar.
If equipped, remove the bolts and the running boards.
17. CAUTION: Use hand tools only to remove the body bolts. Failure to follow this instruction may result in damage to the cage nut.
Remove and discard the body bolts.
18. Disconnect the retaining clip for the power steering cooler tube at the frame.
19. Disconnect the mass air flow (MAF) sensor and filter minder electrical connectors. Disconnect the retaining clip and position the wiring aside.
