F 450 4WD Super Duty V8-6.4L DSL Turbo (2008)
16. NOTICE: Failure to correctly install the high-pressure fuel injection pump heat shield may result in engine damage.
NOTE: High-pressure fuel injection pump heat shield removed for clarity.
Install the high-pressure fuel injection pump heat shield in the vehicle and install the 2 center bolts.
^
Tighten to 13 Nm (115 lb-in).
17. NOTE: Engine removed from the vehicle for clarity.
Position the fuel tube bracket and ground strap. Install the retaining nuts and bolt for the high pressure fuel pump heat shield.
^
Tighten the fuel line bracket nuts to 7 Nm (62 lb-in).
^
Tighten the remaining fasteners to 13 Nm (115 lb-in).
18. Position the EGR-OC pipe in the vehicle.
