F 550 2WD Super Duty V8-7.3L DSL Turbo VIN F (2002)
Pressure Feedback Exhaust Sensor: Service and Repair
REMOVAL
1. Turn the ignition switch to the OFF position.
CAUTION: Make sure the ignition switch is in the OFF position prior to working on the electronic engine controls.
2. Remove the exhaust back pressure sensor.
1
Disconnect the electrical connector.
2
Loosen and remove the sensor from the mounting bracket.
NOTE: The fan and fan clutch are removed for clarity.
INSTALLATION
1. Follow the removal procedure in reverse order.
