ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Gear, M/T|Specifications|Page 4779 > < Flywheel Gear, M/T|Specifications
Page 1
background image

Gear: Specifications

First and second synchronizer with new gear and synchronizer ring clearance 
............................................................................................................................................................................................  1.5-1.85 mm (0.059-0.073 inch) 
Third, fourth, fifth, reverse and low with new gear and synchronizer ring clearance 
..............................................................................................................................................................................................  1.4-1.7 mm (0.055-0.066 inch) 

Gear, M/T|Specifications|Page 4779 > < Flywheel Gear, M/T|Specifications