F 550 4WD Super Duty V10-6.8L VIN S (2000)
2. Use the Crankshaft Damper Replacer to install the crankshaft pulley.
3. Tighten the crankshaft pulley bolt in four stages.
^
Stage 1: Tighten to 90 Nm (66 ft. lbs.).
^
Stage 2: Loosen 360 degrees.
^
Stage 3: Tighten to 47-53 Nm (35-39 ft. lbs.).
^
Stage 4: Tighten an additional 85-95 degrees.
4. Lower the vehicle.
5. Install the engine cooling fan and the fan shroud.