F 550 4WD Super Duty V10-6.8L VIN S (2000)
Axle Nut: Specifications
Rear Full Floating Axle - Dana
Rear Hub Nut ............................................................................................................................................................................................ 95 Nm (70 Lb-Ft)
Note: to set bearings, back off the hub nut 90°, retighten to 24 Nm (18 Lb-Ft). Maximum torque to rotate the hub is 2.3 Nm (20 lb-in) when the end
play is zero.
Axle Shaft Bolts ..................................................................................................................................................................................... 133 Nm (98 Lb-Ft)
Rear Hub Bolts ............................................................................................................................................................................ 89-119 Nm (66-88 Lb-Ft)
