Festiva L4-81 1.3L SOHC (1988)
Engine Mount: Service and Repair
Fig. 1 Installing Front Engine Mount
FRONT MOUNT
1.
Remove mount through bolt attaching nut.
2.
Support engine using suitable tool, then remove through bolt.
3.
Raise and support front of vehicle.
4.
Remove front mount to crossmember attaching nuts, raise engine as necessary, and remove mount from crossmember.
5.
Reverse procedure to install, positioning mount as shown in Fig. 1. Torque through bolt and mount to crossmember attaching nuts to 37 ft. lbs.
REAR MOUNT
1.
Raise and support front of vehicle.
2.
Support engine using suitable tool, then remove rear mount to crossmember attaching nut.
3.
Remove mount to engine bracket attaching bolts, raise engine as necessary, then remove mount from crossmember.
4.
Reverse procedure to install. Torque mount attaching nut and bolts to 37 ft. lbs.
