Festiva L4-81 1.3L SOHC (1988)
Timing Cover: Service and Repair
Fig. 9 Crankshaft Pulley Assembly
1.
Remove accessory drive belts.
2.
Remove water pump pulley to pump hub attaching bolts, then the pulley.
3.
Remove right inner fender panel to gain access to crankshaft pulley.
4.
Remove outer crankshaft pulley attaching bolts, then the outer stiffener/spacer and outer pulley, Fig. 2.
5.
Remove inner stiffener/spacer, attaching screws, inner pulley and baffle plate.
6.
Remove attaching bolts, then the upper and lower timing covers.
7.
Reverse procedure to install, noting the following:
a. Torque timing cover attaching bolts to 69-95 inch lbs (8-11 Nm).
b. When installing crankshaft pulley, ensure curved lip on baffle plate and deep recess of inner pulley face outward.
c. Torque crankshaft and water pump pulley attaching bolts to 36-45 ft. lbs. (49-61 Nm).