ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Cooling System > < Valve Clearance|Specifications|Page 1360
Page 1
background image

Water Pump: Service and Repair

1.

Drain cooling system.

2.

Remove timing belt as outlined previously.

3.

Disconnect lower radiator and heater hoses from water pump inlet.

4.

Remove water pump attaching bolts and the water pump.

5.

Ensure that water pump and cylinder block mating surfaces are clean and free from old gasket material.

6.

Coat both sides of water pump gasket with suitable sealer, then install gasket, water pump and attaching bolts. Torque attaching bolts to 14-19 ft.
lbs.

7.

Connect lower radiator and heater hoses to pump inlet.

8.

Reinstall timing belt.

Cooling System > < Valve Clearance|Specifications|Page 1360