ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

211-04 Steering Column > < Tie Rod End
Steering Linkage - Steering Gear Boot Fiesta 1996 (08/1995-02/2002)
Removal and Installation

Removal

  1. Remove the tie rod end. Refer to the procedure in this section.

  1. Remove the steering gear boot retaining clips.

  1. CAUTION:
    CAUTION:Make sure the tie rod is clean before removing the steering gear boot.
    Remove the steering gear boot.
    1. Disconnect the breather pipe.
    1. Slide the boot off the tie rod.

Installation

  1. To install, reverse the removal procedure.

211-04 Steering Column > < Tie Rod End