ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
309 Exhaust System > < Gearshift Stabilizer Bar

Fiesta 1996 (08.1995-02.2002)

Manual Transmission/Transaxle External Controls - Shift Lever Fiesta 1996 (08/1995-02/2002)
Disassembly and Assembly

Special Tool(s)

Installer, Extension Housing Bushing/Oil Seal

308-045 (16-015)

Disassembly
  1. Remove the following parts:
    1. Remove the stabilizer
    1. Remove the noise damping pad
    1. Remove the gearshift mounting

  1. Remove the gearshift lever.
    1. Press the mounting sleeve locking lugs out of the housing cover using a screwdriver.
    1. Remove the gearshift lever.

  1. Remove the gearshift lever mounting sleeve from the gearshift lever.

  1. Remove the shift rod boot and the housing cover.

Assembly
  1. Reassemble the gearshift mechanism.
    1. Insert the shift rod.
    1. Install the housing cover.
    1. Slide on the shift rod boot.
    1. Slide on the gearshift mounting.
    1. Slide the mounting sleeve onto the gearshift lever.
      NOTE:
      NOTE:Make sure that the gearshift lever is placed correctly in the shift rod.
    1. Install the gear lever.
    1. Install the noise damping pad.

  1. Install the gearshift stabilizer bar.

309 Exhaust System > < Gearshift Stabilizer Bar