ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Generator - 1.8L Endura-DE (Kent) Diesel > < Generator - 1.6L

Fiesta 1996 (08.1995-02.2002)

Generator and Regulator - Generator—1.25L/1.4L Zetec-SE (Sigma) Fiesta 1996 (08/1995-02/2002)
Removal and Installation

Removal

  1. Disconnect the battery ground cable.

  1. Disconnect the generator wiring.
  1. Remove the accessory drive belt. For additional information, refer to Section  303-05 Accessory Drive.
  1. Lower the vehicle.

  1. Remove the generator rear retaining bolt.

  1. Remove the generator front retaining bolts.
  1. Remove the generator.

Installation
  1. To install, reverse the removal procedure.

Generator - 1.8L Endura-DE (Kent) Diesel > < Generator - 1.6L