Front Wheel Alignment (at curb weight)
Description | Tolerance Range | Setting or Nominal | Maximum Variance Left or Right |
Caster angle | Degrees and minutes | 4°38' to 2°38' | 3°38' | 1°00' |
Decimal degrees | 4.64° to 2.64° | 3.64° | 1.00° |
Camber angle | Degrees and minutes | 0°36' to -1°54' | -0°39' | 1°15' |
Decimal degrees | 0.60° to -1.90° | -0.65° | 1.25° |
Total toe | mm | 3.1 Toe in ± 2.2 | 3.1 Toe in ± 1.0 | - |
Degrees and minutes | 0°30' Toe in ± 0°21' | 0°30 Toe in ± 0°10' | - |
Decimal degrees | 0.50° Toe in ± 0.35° | 0.50° Toe in ± 0.17° | - |
Front Wheel Alignment (at curb weight) – ST150
Description | Tolerance Range | Setting or Nominal | Maximum Variance Left or Right |
Caster angle | Degrees and minutes | 4°47' to 2°47' | 3°47' | 1°00' |
Decimal degrees | 4.78° to 2.78° | 3.78° | 1.00° |
Camber angle | Degrees and minutes | 0°02' to -2°28' | -1°13' | 1°15' |
Decimal degrees | 0.03° to -2.47° | -1.22° | 1.25° |
Total toe | mm | 1.1 Toe in ± 2.4 | 1.1 Toe in ± 1.2 | - |
Degrees and minutes | 0°09' Toe in ± 0°20' | 0°09' Toe in ± 0°10' | - |
Decimal degrees | 0.15° Toe in ± 0.34° | 0.15° Toe in ± 0.17° | - |
Front Wheel Alignment (at curb weight) - 3-Door Sport
Description | Tolerance Range | Setting or Nominal | Maximum Variance Left or Right |
Caster angle | Degrees and minutes | 4°39' to 2°34' | 3°37' | 1°00' |
Decimal degrees | 4.65° to 2.57° | 3.61° | 1.00° |
Camber angle | Degrees and minutes | 0°25' to -2°08' | -0°52' | 1°15' |
Decimal degrees | 0.41° to -2.13° | -0.86° | 1.25° |
Total toe | mm | 3.1 Toe in ± 2.2 | 3.1 Toe in ± 1.0 | - |
Degrees and minutes | 0°30' Toe in ± 0°21' | 0°30 Toe in ± 0°10' | - |
Decimal degrees | 0.50° Toe in ± 0.35° | 0.50° Toe in ± 0.17° | - |
Rear Wheel Alignment (at curb weight) - All vehicles except ST150
Description | Tolerance Range | Setting or Nominal | Maximum Variance Left or Right |
Camber angle | Degrees and minutes | 0°07' to -2°23' | -1°08' | 1°15' |
Decimal degrees | 0.11° to -2.39° | -1.14° | 1.25° |
Total toe | mm | 3.2 Toe in ± 2.1 | 3.2 | - |
Degrees and minutes | 0°31' Toe in ± 0°20' | 0°31' | - |
Decimal degrees | 0.52° Toe in ± 0.34° | 0.52° | - |
Rear Wheel Alignment (at curb weight) – ST150
Description | Tolerance Range | Setting or Nominal | Maximum Variance Left or Right |
Camber angle | Degrees and minutes | 0°06' to -2°24' | -1°09' | 1°15' |
Decimal degrees | 0.10° to -2.40° | -1.15° | 1.25° |
Total toe | mm | 3.6 Toe in ± 4.8 | 3.6 | - |
Degrees and minutes | 0°31' Toe in ± 0°40' | 0°31' | - |
Decimal degrees | 0.51° Toe in ± 0.67° | 0.51° | - |
Torque Specifications
Item | Nm | lb-ft | lb-in |
Tie-rod end locknut | 63 | 46 | - |