ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Timing Belt > < Camshafts

Fiesta 2002.25 (11.2001-)

Engine - 1.25L Duratec-16V (Sigma)/1.4L Duratec-16V (Sigma)/1.6L Duratec-16V (Sigma) - Camshaft Seal Fiesta 2002.25 (11/2001-)
In-vehicle Repair

Special Tool(s)

Universal Flange Holding Wrench

205-072

Remover, Crankshaft Seal

303-293

Installer, Crankshaft Seal

303-395
Materials
Name
Specification
Engine Oil
WSS-M2C912-A1 

Removal

  1. Remove the timing belt.
    For additional information, refer to: Timing Belt (303-01A Engine - 1.25L Duratec-16V (Sigma)/1.4L Duratec-16V (Sigma)/1.6L Duratec-16V (Sigma), In-vehicle Repair).

  1. CAUTION:
    CAUTION:Install a hose (order no. E890438S) to the special tool studs, to prevent damage to the camshaft pulleys.
    Remove the camshaft pulleys.
    • Discard the retaining bolts.

  1. Using the special tool, remove the camshaft seal.
    • Discard the oil seal.

Installation
  1. NOTE:
    NOTE:Install a new camshaft seal.
    NOTE:
    NOTE:Coat the camshaft journals and camshaft seal with clean engine oil.
    Using the special tool, install the camshaft oil seal.
  1. NOTE:
    NOTE:Do not fully tighten the camshaft pulleys retaining bolts at this stage. Make sure the camshaft pulleys turn on the camshafts.
    NOTE:
    NOTE:Install new camshaft pulley retaining bolts.
    Install the camshaft timing pulleys.
  1. Install the timing belt.
    For additional information, refer to: Timing Belt (303-01A Engine - 1.25L Duratec-16V (Sigma)/1.4L Duratec-16V (Sigma)/1.6L Duratec-16V (Sigma), In-vehicle Repair).

Timing Belt > < Camshafts