ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Thermostat Housing > < Cooling System Draining, Filling and Bleeding

Fiesta 2002.25 (11.2001-)

Engine Cooling - 2.0L Duratec-HE (MI4) - Coolant Pump Fiesta 2002.25 (11/2001-)
Removal and Installation

  1. Drain the cooling system.
    For additional information, refer to: Cooling System Draining, Filling and Bleeding (303-03C Engine Cooling - 2.0L Duratec-HE (MI4), General Procedures).

  1. Remove the crankshaft pulley splash shield.

  1. Loosen the coolant pump pulley retaining bolts.
  1. Remove the accessory drive belt.
    For additional information, refer to: Accessory Drive Belt - 2.0L Duratec-HE (MI4) (303-05 Accessory Drive, Removal and Installation).

5. Remove the components in the order indicated in the following illustration(s) and table(s).

 
Item
Part Number
Description
1
-
Coolant pump pulley
2
-
Coolant pump retaining bolts
3
-
Coolant pump
4
-
Coolant pump gasket

6. To install, reverse the removal procedure.

Thermostat Housing > < Cooling System Draining, Filling and Bleeding