| Removal and Installation Removal and Installation | | -
Remove the air cleaner intake pipe retaining bolt and detach the air cleaner intake pipe at the rear of the air cleaner. | | | -
Disconnect the mass air flow (MAF) sensor electrical connector. | | | -
Disconnect the air cleaner outlet pipe from the MAF sensor. | | | -
Detach the fuel pump fuel return line from the air cleaner. | | | -
Detach the manifold absolute pressure (MAP) sensor from the air cleaner. | | | -
Detach the fuel system hand primer from the air cleaner. | | | -
Detach the air cleaner. - Pull the air cleaner up at the rear.
| | | -
Detach the fuel charging wiring harness from the rear of the air cleaner. | | | -
Detach the glow plug wiring harness from the base of the air cleaner (shown from the rear for clarity). | Installation | | -
To install, reverse the removal procedure. | | |
