| Removal and Installation 1. Remove the components in the order indicated in the following illustration(s) and table(s). 1 - Mass air flow (MAF) sensor electrical connector 4 - Air cleaner outlet hose retaining clip 5 - Air cleaner intake pipe 2. To install, reverse the removal procedure. NOTE:Make sure that the inside of the air cleaner outlet hose is clean and free from any oil residue, as this will reduce the installation grip of the hose to the air cleaner and intake manifold. NOTE:Make sure that the PCV hose connector is clean and free from any oil residue. Removal Details Item 2 : Positive crankcase ventilation (PCV) hose connector | | -
Detach the PCV hose connector from the valve cover. | Item 3 : Vacuum line | | -
Detach the vacuum line from the air cleaner and position it to one side. | | 
