Removal and Installation Removal | -
Remove the gearshift lever. For additional information, refer to Gearshift Lever in this section. | | -
Remove the exhaust front hanger insulator. | | -
Detach the exhaust heat shield from the floor panel. - Slide the heat shield backwards.
| | -
Remove the gearshift cables cover. | | -
Detach the gearshift cables from the transaxle. - Detach the gearshift cable and the selector cable from the selector levers.
- Turn the abutment sleeves clockwise and detach the cables from the bracket.
| | -
Detach the gearshift cables from the retaining clip. | | -
Detach the selector cable from the retaining clip. | | -
Remove the air distribution channel. | | -
Cut the floor covering and the sound deadening material to gain access to the gearshift cable bushing. | | -
Detach the gearshift cables bushing from the floor panel and pull the cables through to the vehicle interior. | Installation | -
NOTE:Do not bend or kink the gearshift cables. Feed the gearshift cables through the floor panel and attach the gearshift cables bushing. | | -
Install the air distribution channel. | | -
Attach the gearshift cables to the bracket and turn the abutment sleeves counterclockwise. | | -
Attach the gearshift cables to the selector levers. | | -
Attach the exhaust heat shield to the floor panel. - Slide the heat shield forwards.
| | -
Install the exhaust front hanger insulator. | | -
Attach the gearshift cables to the retaining clip. | | -
Attach the selector cable to the retaining clip. | | -
Install the gearshift lever. For additional information, refer to Gearshift Lever in this section. | | |