| Removal and Installation Removal All vehicles | | -
Detach the rear door latch remote control handle bezel. - Remove the screw cover.
- Remove the retaining screw.
| | | -
Detach the door pull handle. - Remove the screw cover.
- Remove the retaining screw.
| Vehicles with manual windows | | -
Remove the window regulator handle. - Use a suitable piece of hooked wire or similar.
| Vehicles with power windows | | -
Remove the window control switch. - Detach the window control switch from the rear door trim panel.
- Disconnect the window control switch electrical connector.
| All vehicles | | -
Detach the door trim panel - Pull the door trim panel out at the bottom to detach the retaining clips.
- Lift up the door trim panel to release from the door.
| | | -
Disconnect the door latch remote control cable from the door handle and remove the door trim panel. | Installation | | -
To install, reverse the removal procedure. | |
