Five Hundred 2WD V6-3.0L VIN 1 (2006)
Removal
WARNING: To prevent glass splinters from entering eyes or cutting hands, wear safety glasses and heavy gloves when cutting glass from the
vehicle.
1. Remove the A-pillar trim panels.
2. Remove the interior mirror.
3. Partially lower the front portion of the headliner near the windshield header and block with suitable material.
4. Remove the cowl panel grille.
5. NOTE:
-
Lubricate the existing urethane adhesive with water to aid the special tool while cutting.
-
Removing the windshield glass requires more than one technician.
Using the special tool, cut the urethane adhesive from the windshield glass starting at the top center and working toward the bottom corners.
