ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 6285 > < Initial Inspection and Diagnostic Overview|Page 6283
Page 2
background image

-

Is the voltage greater than 10 volts?

Yes

GO to A4.

No

REPAIR the circuit. TEST the system for normal operation.

-------------------------------------------------
A4 CHECK CIRCUIT GD133 (BK) FOR AN OPEN

-

Ignition OFF.

-

Disconnect: Negative Battery Cable.

-

Measure the resistance between the LH vanity mirror lamp C907-2, circuit GD133 (BK), harness side and ground.

-

Is the resistance less than 5 ohms?

Yes

INSTALL a new LH sun visor assembly. TEST the system for normal operation.

No

REPAIR the circuit. TEST the system for normal operation.

-------------------------------------------------

Initial Inspection and Diagnostic Overview|Page 6285 > < Initial Inspection and Diagnostic Overview|Page 6283