Flex AWD V6-3.5L (2009)
Rear Door Panel: Service and Repair
Door Trim Panel - Rear
Removal and Installation
1. Remove the rear door trim panel reflector and remove the rear door trim panel screw.
2. Remove the rear door inside door handle screw cover.
3. Remove the rear door inside door handle screw.
4. Remove the rear door trim panel center screw cover.
5. Remove the rear door trim panel center screw.
6. Remove the 4 rear door trim panel screws.
7. NOTICE: Avoid pulling directly on the upper rear corner (vinyl portion) of the door trim panel during removal to prevent damage to the
door trim panel.
Remove the rear door trim panel.
-
Pull the rear door trim outward to release the retaining clips.
-
If equipped, disconnect the electrical connectors.
-
Position the inside door handle through the rear door trim panel.
8. NOTICE: To avoid damage to the door trim panel, remove any retaining clips from the door and attach them to the door trim panel