Flex AWD V6-3.5L (2009)
-
Install the drain plug and tighten to 27 Nm (20 lb-ft).
42. Remove and discard the engine oil filter.
43. If equipped, detach the oil cooler hose support clip from the subframe.
44. Remove the Power Steering Pressure (PSP) tube bracket-to-steering gear bolt.
45. Remove the bolt, rotate the clamp plate clockwise and disconnect the PSP tube from the steering gear.
-
Discard the O-ring seal.
46. Remove the 2 engine roll restrictor-to-transaxle bolts.
47. NOTE: RH shown, LH similar.
Remove and discard the upper stabilizer link nuts.