Flex AWD V6-3.5L (2009)
24. Install the LH cylinder block drain plug.
-
Tighten to 20 Nm (177 lb-in) plus an additional 180 degrees.
25. Install the RH cylinder block drain plug or, if equipped, the block heater.
-
Tighten to 40 Nm (30 lb-ft).
Front Wheel Drive (FWD) vehicles
26. Using a new gasket, install the RH catalytic converter and 4 new nuts.
-
Tighten to 40 Nm (30 lb-ft).
All vehicles
27. Using a new gasket, install the LH catalytic converter and 4 new nuts (3 shown).
-
Tighten to 40 Nm (30 lb-ft).
