Flex AWD V6-3.5L (2009)
17. Remove the 4 Y-pipe-to-catalytic converter nuts.
-
Discard the nuts.
18. Remove the 2 Y-pipe flange nuts.
-
Detach the exhaust hanger and remove the Y-pipe.
-
Discard the gaskets and nuts.
19. Remove the drain plug and drain the engine oil.
-
Install the drain plug and tighten to 27 Nm (20 lb-ft).
20. Disconnect the hose from the power steering reservoir.
21. Remove the RH and LH valve covers. For additional information, refer to Valve Cover - LH See: Cylinder Head Assembly/Valve Cover/Service
and Repair/Valve Cover - LH and Valve Cover - RH See: Cylinder Head Assembly/Valve Cover/Service and Repair/Valve Cover - RH.
22. Detach the wiring harness retainer from the engine mount bracket stud bolt.
