Flex AWD V6-3.5L (2009)
14. Loosen the 2 transmission fluid cooler tube fittings and remove the 2 transmission fluid cooler tubes from the thermal bypass valve and the
transaxle.
15. Inspect the transaxle case to be sure that the transmission fluid cooler tube seals and backing rings were removed with the transmission fluid cooler
tubes and are not stuck in the transaxle case. If the transmission fluid cooler tube seals or backing rings are stuck in the transaxle case, remove the
seals and backing rings.
16. Remove the 2 transmission thermal bypass valve nuts and the transmission thermal bypass valve.
Installation
1. Position the transmission fluid cooler thermal bypass valve in place and install the 2 thermal bypass valve nuts.
-
Tighten to 9 Nm (80 lb-in).
