Flex FWD V6-35L (2010) Rear Door Window Glass Weatherstrip - Exploded View
Rear Door Window Glass Weatherstrip: Service and Repair
Door Glass Run Retainer - Rear
Door Glass Run Retainer - Rear
Removal and Installation
1. Position the rear door glass to the full UP position.
2. Remove the rear door trim panel.
3. Position aside the water shield.
4. Remove the 2 door glass run retainer bolts.
-
To install, tighten to 8 Nm (71 lb-in).
5. Remove the glass run retainer through the large opening in the door.
6. To install, reverse the removal procedure.