Flex FWD V6-3.5L (2010)
Seat Backrest - Third Row
Seat Backrest - Third Row
Removal and Installation
NOTE: To remove the RH third row seat backrest, the LH seat outboard pivot cover must be removed before the RH seat outboard pivot cover can be
removed.
LH or RH backrest
1. Pry to release the clips and remove the LH seat outboard pivot cover.
RH backrest
2. Pry to release the clips and remove the RH seat outboard pivot cover.
LH or RH backrest
3. Release the backrest trim cover lower J-strip, open the trim cover and release the inner J-clips.
4. Remove the pivot bolt.
-
To install, tighten to 22 Nm (16 lb-ft).
