Flex FWD V6-3.5L (2010)
15. Position the deployment chute around the side air bag module.
1. Insert the outboard side of the side air bag deployment chute between the backrest foam pad and the side air bag module, pulling it around the
outboard side of the backrest frame.
2. Insert the inboard side of the side air bag deployment chute between the backrest foam pad and the backrest frame, pulling it around the
inboard side of the backrest frame.
16. Engage the side air bag deployment chute retaining clips and snap them together.
-
The side air bag deployment chute must encircle the side air bag module, going completely around the side air bag module and the side of the
backrest frame.
-
Align the side air bag deployment chute to the side air bag module, making sure it is centered around the side air bag module.
17. From the rear of the backrest, attach the backrest cover J-clip to the backrest frame wire.
18. Roll the backrest cover down and install the 3 second row hog rings.
