Flex FWD V6-3.5L (2010)
6. NOTE: For retainer clarity, inside of cushion side shield shown.
Separate the cushion side shield.
1. Remove the scrivet at the rear of the cushion side shield.
2. Remove the screw at the rear of the cushion side shield.
3. Remove the screw at the front of the cushion side shield.
4. Pull out to release the clips and separate the cushion side shield.
7. Separate the backrest trim cover lower J-clips and invert the backrest trim cover up to the first row of hog rings.
8. Remove the 3 first row hog rings.
9. Invert the backrest cover up to the second row of hog rings.
10. If equipped with a DVD player, remove the 2 head restraint guides sleeves. For additional information, refer to Head Restraint Guide Sleeve See:
Head Rest/Service and Repair/Head Restraint Guide Sleeve.
11. Remove the 3 second row hog rings.
