Flex FWD V6-3.5L (2010)
60. Install the upper intake manifold support bracket bolt.
-
Tighten to 10 Nm (89 lb-in).
61. Attach the wiring harness retainers to the upper intake manifold.
62. Connect the Throttle Body (TB) electrical connector.
63. Connect the PCV hose to the PCV valve.
64. Raise the engine and transaxle assembly into the vehicle.
65. Install the engine mount and the 3 bolts.
-
Tighten to 90 Nm (66 lb-ft).
66. Install the 4 engine mount nuts.
-
Tighten to 63 Nm (46 lb-ft).