Flex FWD V6-3.5L (2010)
1. 42 mm (1.653 in) bolt
2. 63 mm (2.48 in) bolts
3. 80 mm (3.149 in) bolts
4. 95 mm (3.74 in) bolts
3. Tighten the solenoid body bolts in the sequence shown.
-
Tighten to 12 Nm (106 lb-in).
4. Route the OSS sensor wiring harness and connect the electrical connector.
5. Connect the TR sensor electrical connector.
1. Connect the electrical connector.
2. Slide the locking tab over.
