Focus L4-2.0L (2009)
Front Door Hinge: Adjustments
Door Alignment - Front
All alignments
1. Remove the door latch striker plate.
Front door in and out, up and down alignment
2. Loosen, but do not remove, the front door hinge-to-front door fasteners enough to allow door alignment.
Front door fore, aft and tilt alignment
3. Loosen, but do not remove, the front door hinge-to-body fasteners enough to allow door alignment.
All alignments
4. Adjust the door.
5. Tighten the door fasteners.
-
Tighten the front door hinge-to-front door fasteners to 48 Nm (35 lb-ft).
-
Tighten the front door hinge-to-body fasteners to 28 Nm (21 lb-ft).
6. Install and adjust the door striker as necessary. For additional information, refer to Striker Adjustment See: Adjustments/Striker Adjustment.
