Focus L4-2.0L (2009)
4. Install the selector lever. For additional information, refer to Selector Lever See: Shifter A/T/Service and Repair/Selector Lever.
5. Position the selector lever cable bracket in place and install the 2 bolts.
-
Tighten to 25 Nm (18 lb-ft).
6. Install the transmission fluid filler tube bolt.
-
Tighten to 8 Nm (71 lb-in).
7. Move the selector lever to the DRIVE position.
8. Move the manual control lever to the DRIVE position.
9. Unlock the selector lever cable end. Make sure that the selector lever cable end moves freely.