Focus L4-2.0L DOHC VIN 5 (2003)
11. Disconnect the steering column shaft from the steering gear pinion extension.
1
Remove and discard the bolt.
2
Release the pinion shaft extension from the steering column.
Vehicles built 01/1999 onwards
12. Remove the brake pedal retractor arm retaining bolt.
^
Remove the air duct, if necessary.
All vehicles
13. Remove the brake pedal bracket.
Installation
All vehicles
1. NOTE: Make sure the brake pedal locates into the brake booster actuating rod clevis.
Install the brake pedal bracket.
2. NOTE: Do not fully tighten the brake booster retaining nuts at this stage.
Install the brake booster retaining nuts (clutch position switch bracket shown removed for clarity).
