Focus L4-2.0L DOHC VIN 5 (2003)
NOTE: Working in several stages, evenly loosen each bolt two turns at a time in the indicated sequence and remove the bolts.
Remove the camshafts.
Installation
1. NOTE: Working in several stages, install the camshaft bearing caps in the indicated sequence, tighten the bolts evenly one half turn at a time.
Install the camshafts.
^
Tighten the bolts in the sequence shown.
2. NOTE: Install a new oil feed flange seal.
Apply sealant to the marked areas on the oil feed flange.
3. Install the oil feed flange.
