ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Front Door Panel > < Door Latch Remote Control|Page 8741
Page 9
background image

18. Install the screw.

19. Install the side impact energy absorption panel.

20. Close the door latch lever in the jaws of the door latch.

NOTE:  Two audible clicks should be heard when the door latch lever is closed completely.

21. Lock and unlock the door latch using the rocker lever on the door latch remote control handle.

22. Open the door latch using the exterior door handle. The door latch should open at approximately 75% of handle full travel. The exterior door

handle should have between 5-6 mm of travel after the door latch has released.

23. If the door latch does not open correctly remove the door latch and reset the door latch connecting rod adjustment clip.
24. Install the front door trim panel. 

Front Door Panel > < Door Latch Remote Control|Page 8741