Focus L4-2.0L SOHC VIN P (2000)
6. Detach the watershield.
^
Using a plastic knife (disposable cutlery), cut through the Butyl strip to enable the watershield to he peeled back.
CAUTION: Do not touch the adhesive surface as re-bonding will be impaired.
7. Install the window regulator handle.
8. Align the regulator clamp with the access hole (power window shown).
9. Detach the window glass from the regulator.
1. Push out the pin.
2. Push out the sleeve.
3. Remove the glass from the regulator clamp.
NOTE: Do not remove the glass from the door.
10. Remove the window regulator handle.
INSTALLATION
