| Removal and Installation Removal All vehicles | | -
Remove the brake disc.
For additional information, refer to: Brake Disc (206-04 Rear Disc Brake, Removal and Installation).
| Vehicles with anti-lock brakes | | -
Detach the wheel speed sensor wiring harness from the wheel knuckle and floor panel. - Disconnect the electrical connector.
- Detach the clips.
| | | -
CAUTION:Do not damage the wheel speed sensor wiring harness or electrical connector. NOTE:The wheel speed sensor wiring harness is routed through the wheel knuckle. Remove the wheel spindle and wheel hub assembly. | Vehicles without anti-lock brakes | | -
Remove the wheel spindle and wheel hub assembly. | | | -
Remove the brake disc shield. | Installation | | -
CAUTION:Make sure that the mating faces are clean and free from rust and foreign material. To install, reverse the removal procedure. | |
