Removal and Installation Special Tool(s) | Remover/Installer, Pivot Bushing 205 - 297 (15 - 086) | | Installer, Wheel Hub 204 - 148 (14 - 037) | Removal | -
Using the special tools, remove the insulator bushings. | | -
Thoroughly clean and visually inspect the bushing housing for signs of damage. If the housing is damaged, install a new steering gear. For additional information, refer to Gear - Power Steering in this section. | Installation All Vehicles | -
NOTE:Lubricate the new bushing with a suitable rubber lubricant. Using the special tool, install new insulator bushings. | Left-hand drive vehicles | -
Using the special tools, make sure the insulator bushings are installed to the correct depth. | Right-hand drive vehicles | -
Using the special tools, make sure the insulator bushings are installed to the correct depth. | All Vehicles |