ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Gearshift Cable Adjustment - Vehicles With: 5-Speed Manual Transmission (MTX-75) > < Clutch System Bleeding - Vehicles With: 5-Speed Manual Transmission (MTX-75)

Focus 1999 (08.1998-12.2004)

Manual Transmission/Transaxle and Clutch - General Information - Gearshift Cable Adjustment—Vehicles With: 5-Speed Manual Transmission (iB5) Focus 1999 (08/1998-12/2004)
General Procedures

General Equipment
3 mm drill bit
  1. Shift the gearshift mechanism to neutral.

  1. Unclip the gearshift lever cover.

  1. NOTE:
    NOTE:Insert the drill bit correctly
    Insert 3 mm drill bit .
  1. Raise the vehicle. For additional information, refer to Section  100-02 Jacking and Lifting.

  1. Open the shift and selector cable cover.

  1. Adjust the gearshift mechanism.
    1. Unlock the selector cable (press colored insert).
    1. Move the selector lever to its center position.

  1. Adjust the gearshift mechanism (continued).
    1. Engage 3rd or 4th gear (move the gearshift lever to its right-hand or left-hand stop position).
    1. Lock the selector cable.

  1. Close the shift and selector cable cover.
  1. Lower the vehicle.
  1. Pull out the drill bit.

  1. Clip in the shift lever cover.

Gearshift Cable Adjustment - Vehicles With: 5-Speed Manual Transmission (MTX-75) > < Clutch System Bleeding - Vehicles With: 5-Speed Manual Transmission (MTX-75)