ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Rear Seat Backrest > < Front Seat Backrest - 2.0L Duratec-ST (Zetec)

Focus 1999 (08.1998-12.2004)

Seating - Rear Seat Backrest—Vehicles With: 40/20/40 Split Seat Focus 1999 (08/1998-12/2004)
Removal and Installation

Removal

  1. Fold the rear seat cushion forwards.

  1. CAUTION:
    CAUTION:Make sure a webbing retainer is fitted at least 200 mm towards the safety belt retractor from the webbing stop.
    Install the safety belt webbing retainer.

  1. Detach the rear center safety belt buckle.
  1. Fold the rear seat backrest forwards.

  1. Remove the rear seat backrest (40/20 percent shown).
    • Remove the outer retaining screws.
    • Remove the center hinge retaining screw.

Installation

  1. CAUTION:
    CAUTION:Check for correct operation of the center safety belt retractor.
    To install, reverse the removal procedure.

Rear Seat Backrest > < Front Seat Backrest - 2.0L Duratec-ST (Zetec)