Removal and Installation Removal | -
General information - The quarter panel, back panel, lamp mounting panel with reinforcement are already removed before the start of repairs.
- Move carpets and wiring out of the working area.
| | -
Water drain panel - Mill out the spot welds.
- Mill out the spot welds (two panel thicknesses).
| | -
Water drain panel - Mill out the spot welds from below or from the rear.
| Installation | -
Water drain panel - Insert the water drain panel and mark from above through the existing holes (arrowed) on the luggage compartment bridge.
| | -
Water drain panel - Drill holes for puddle welding.
| | |