NOTE:The Anti-lock Brake System (ABS) sensor ring is incorporated into the wheel hub. Incorrect installation of the wheel hub would result in an ABS malfunction.
The front suspension features McPherson struts and 'L' shaped lower arms which are attached to the front axle crossmember by means of two maintenance-free bushings.
The ball joint is attached to the lower arm by means of three rivets. Bolt-on replacement ball joints are available for service operations.
The correct installation position must be observed when installing the strut and spring assembly turret support bearings. To make sure that the strut and spring assembly turret support bearings, springs and piston rods are all aligned correctly, the spring retainers and strut and spring assembly turret support bearings have alignment marks.