ford Workshop Repair Guides

Ford Focus Workshop Service and Auto Repair Manuals - All Models

Charge Air Cooler > < Air Cleaner - Vehicles With: PCM Security Shield
Intake Air Distribution and Filtering - 2.5L Duratec-ST (VI5) - Air Cleaner—Vehicles Without: PCM Security Shield Focus 2004.75 (07/2004-)
Removal and Installation

Removal

NOTE:
NOTE:Removal steps in this procedure may contain installation details.
  1. Disconnect the battery ground cable.
    Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).

  1. NOTE:
    NOTE:Make sure that the inside of the pipe ends are clean and free of oil residue.

  1. Torque: 10 Nm

  1. Torque: 7 Nm

Installation

  1. To install, reverse the removal procedure.
  1. Initialize the door window motors.
    Refer to: Door Window Motor Initialization (501-11 Glass, Frames and Mechanisms, General Procedures).

Charge Air Cooler > < Air Cleaner - Vehicles With: PCM Security Shield