| Removal and Installation | | -
Remove the heater/air conditioning control panel.
For additional information, refer to: Bedienteil - Heizung/Klimaanlage - Fahrzeuge ausgestattet mit Manueller Temperaturregelung (412-04, Removal and Installation).
| 2. Remove the components in the order indicated in the following illustration(s) and table(s). CAUTION:Ensure that the blower motor switch is set to switch position 1 during installation and removal, in order to prevent damage to the control panel electronics. NOTE:The rear cover of the climate control assembly is shown removed for clarity. 1 - Blower motor switch rotary knob 3. To install, reverse the removal procedure. Removal Details Item 2 : Blower motor switch cover | | -
Remove the blower motor switch cover. - Cut through the retaining tabs.
| Installation Details Item 2 : Blower motor switch cover | | -
NOTE:The service kit for the motor blower switch contains a modified cover which can be attached to the climate control assembly rear cover by means of the two screws provided. Install the blower motor switch together with the blower motor switch cover. | | 
