ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Blower Motor Switch > < Climate Control Module - Vehicles Built From: 01-2008
Control Components - Climate Control Module—Vehicles Built Up To: 01/2008 Focus 2004.75 (07/2004-)
Removal and Installation

Audio unit removal tools (GV3301)
NOTE:
NOTE:When attaching the audio unit removal tools, ensure that they are attached according to the markings on the removal tools: TOP L (left) indicates the top left-hand side of the removal tool, TOP R (right) indicates the top right-hand side of the removal tool.

1. Remove the components in the order indicated in the following illustration(s) and table(s).

 
Item
Part Number
Description
1
-
Audio unit removal tools
3
-
Navigation system control panel connector
4
-
Audio unit connector
See Removal Detail
5
-
Antenna cable
6
-
A/C module connector

 
Item
Part Number
Description
7
-
A/C module bolts
8
-
A/C module

2. To install, reverse the removal procedure.

NOTE:
NOTE:Detach the audio unit removal tools from the navigation system control panel prior to installing the navigation system control panel.

Removal Details

Item 2 : Navigation system control panel

  1. CAUTION:
    CAUTION:Make certain that the wiring harnesses are not put under excessive tension when the navigation system control panel is pulled out.
    Remove the navigation system control panel from the instrument panel.

Item 4 : Audio unit connector

  1. Disconnect the audio unit connector.
    • Release the retaining tabs.

Installation Details

Item 2 : Navigation system control panel

  1. CAUTION:
    CAUTION:Make sure that the audio unit wiring harness, climate control module wiring harness, navigation system display module wiring harness and antenna cable do not become trapped when installing the navigation system control panel.
    The audio unit rear bracket must engage in the audio unit mounting.

Blower Motor Switch > < Climate Control Module - Vehicles Built From: 01-2008