Freestar V6-4.2L VIN 2 (2004)
Part 2 Of 2
3. Remove the parts in the order indicated in the following illustration and table. To remove individual parts, only carry out the listed stems:
4. To install, reverse the removal procedure.
5. Bleed the brake system. For additional information, refer to Brake System Bleeding.
6. Inspect the brake system for proper operation.
Item 3: Brake Tube Fittings Removal Note
1. Cap the brake line and plug the master cylinder ports.
Item 5: Brake Master Cylinder Removal Note
1. Use a suitable suction device to drain the reservoir before removal.
2. If removing the brake booster, position the brake master cylinder forward.
Item 14: Brake Booster Removal Note
